FRC with Tamper Proof
FRC1 series - Sizes G1/8, 1/4, 3/8, 1/2, 3/4, 1
Features
- Modular type
- Suitable for panel mounting
- Filter
• Bronze filtering element
• Separator and shield for efficient moisture separation - Regulator
• Diaphragm operated, relieving type
• Pressure compensated by balanced poppet
• Flow compensated in models FRC14, FRC15 and FRC17 for faster response
• Non raising press to lock adjusting knob for locking at any set pressure - Steel bowl guard, bayonet type on FRC14, FRC15 & FRC17 models and threaded type on FRC13 model
- Good flow and regulating characteristics
- Tamper proof (Setting secured via screw on knob)
Function
- Prevents ordinary hand adjustments
- Outlet pressure settings remain unchanged. These regulators give extra level of security.
(Set the desired outlet pressure and lock with screw to prevent further adjustment.)
- Note the direction of flow before installation and connect piping accordingly
- Flush pipings for dirt, dust, rust and other foreign particles
- Install in clean atmosphere
- Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape does not enter the unit during tightening. Nipples of straight threads ( G ) to be used with sealing washer
- Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene kerosene or other aromatic hydrocarbons
Pressure Setting
Pull the knob and adjust by turning the knob clockwise to increase the pressure. Push the knob back to its locked position. ( Turning the knob counter clockwise will reduce the pressure )
